Kent Wood Fires
Flame-Effect Gas Fires
Wood Fire Accessories
Where to Buy
Parts & Advice
Care & Tips
Tilefire Max II
R & C
The kilowatt rating is the maximum rated output of the fire burning dry soft wood when tested to NZHHA approved test methodology.
Gives an indication of the floor area able to be heated by the fire. This assumes a normal stud height of 2.4m and an adequate level of insulation in the home.
Radiant and Convection
Heat medium to large spaces with a Radiant and Convection wood fire. The fire creates warm air currents which circulate via convection, warming the area the fire is situated in. A secondary radiant effect produces sun-like warmth in close proximity to the fire.
A Government requirement for fuel to be completely gasified and burned, producing a minimum of polluting by-products such as smoke, creosote or ash. Non-clean air fires can still be used in properties located on land greater than 2ha.
All Kent fireboxes are guaranteed for 15 years. The seal, door seal, fire bricks, flue, secondary air system and removable baffle have a one year warranty (parts only).
Clean air approved mid-size radiant and convection wood tile fire
Matt black design,with external tiles, 5mm steel
Vermiculite brick lined firebox
15 year firebox warranty
Estimated maximum heat output: 15kW
Heats area up to 180m² (typically up to four standard rooms)
Average emission rate: 0.53g/kg or 38.43mg/MJ
Overall average efficiency: 69%
NZ ECAN No.: 132877
Standard Flue Kit Inc. Reflector for Freestanding Fires
Energy Saver Flue Kit Inc. Reflector for Freestanding Fires
Wall Floor Protector – Large
Corner Floor Protector – Large
Wall Fire Guard – Large
Where to Buy
Aber Holdings Ltd.
All rights reserved
Terms & Conditions