Rata Inbuilt Wood Fire

  • Heat output
  • Floor area
  • Radiant and convection heat
    R & C
  • Clean air approved
    Clean Air
  • Kent warranty
  • kW The kilowatt rating is the maximum rated output of the fire burning dry soft wood when tested to NZHHA approved test methodology.
  • Gives an indication of the floor area able to be heated by the fire. This assumes a normal stud height of 2.4m and an adequate level of insulation in the home.
  • Radiant and Convection Heat medium to large spaces with a Radiant and Convection wood fire. The fire creates warm air currents which circulate via convection, warming the area the fire is situated in. A secondary radiant effect produces sun-like warmth in close proximity to the fire.
  • Clean Air A Government requirement for fuel to be completely gasified and burned, producing a minimum of polluting by-products such as smoke, creosote or ash. Non-clean air fires can still be used in properties located on land greater than 2ha.
  • Warranty All Kent fireboxes are guaranteed for 15 years. The seal, door seal, fire bricks, flue, secondary air system and removable baffle have a one year warranty (parts only).


  • NZ Clean air approved mid-size radiant and convection inbuilt wood fireplace
  • Flush-mount matt black design, 6mm steel
  • Vermiculite brick lined firebox
  • Multi-burn firebox helps glass remain clear
  • Zero clearance kit available for new homes
  • 15 year fire box warranty


  • Estimated maximum heat output: 15kW
  • Heats area up to 190m² (typically up to three standard rooms)
  • Average emission rate: 0.51g/kg.
  • Overall average efficiency: 69%.
  • NZ ECAN No. 142831


  • Flue Kit for Insert Fires
  • Zero Clearance Box (Flue Kit not included)
  • Zero Clearance Box (Flue Kit included)

You may also like