Kent Wood Fires
Flame-Effect Gas Fires
Wood Fire Accessories
Where to Buy
Parts & Advice
Care & Tips
The kilowatt rating is the maximum rated output of the fire burning dry soft wood when tested to NZHHA approved test methodology.
Gives an indication of the floor area able to be heated by the fire. This assumes a normal stud height of 2.4m and an adequate level of insulation in the home.
A radiant wood fire produces sun-like warmth as the heat radiates from its steel body. Heat is produced quickly once the fire is well established, warming people in close proximity. Ideal for heating smaller spaces.
A Government requirement for fuel to be completely gasified and burned, producing a minimum of polluting by-products such as smoke, creosote or ash. Non-clean air fires can still be used in properties located on land greater than 2ha.
All Kent fireboxes are guaranteed for 15 years. The seal, door seal, fire bricks, flue, secondary air system and removable baffle have a one year warranty (parts only).
Clean air approved small-size radiant wood fire
Contemporary matt black design, 5mm steel
Vermiculite brick lined firebox
Multi-burn firebox helps glass remain clear
Steel plate top for cooking use
15 year firebox warranty
Estimated maximum heat output: 14kW
Heats area up to 150m² (typically up to three standard rooms)
Average emission rate: 0.80g/kg
Overall average efficiency: 69%
ECAN Authorisation No. 165498
Standard Flue Kit Inc. Reflector for Freestanding Fires
Energy Saver Flue Kit Inc. Reflector for Freestanding Fires
Wall Floor Protector – Small
Corner Floor Protector – Small
Wall Fire Guard – Small
Tekapo Multi Purpose
Where to Buy
Aber Holdings Ltd.
All rights reserved
Terms & Conditions