• Facebook
  • Twitter
  • Email

Aspiring Wood Fire

Model:
KWF295-6951
RRP:
$2,199
  • Heat output
    18kW
  • Floor area
    210m²
  • Radiant and convection heat
    R & C
  • Clean air approved
    Clean Air
  • Kent warranty
    Warranty
  • kW The kilowatt rating is the maximum rated output of the fire burning dry soft wood when tested to NZHHA approved test methodology.
  • m² Gives an indication of the floor area able to be heated by the fire. This assumes a normal stud height of 2.4m and an adequate level of insulation in the home.
  • Radiant and Convection Heat medium to large spaces with a Radiant and Convection wood fire. The fire creates warm air currents which circulate via convection, warming the area the fire is situated in. A secondary radiant effect produces sun-like warmth in close proximity to the fire.
  • Clean Air A Government requirement for fuel to be completely gasified and burned, producing a minimum of polluting by-products such as smoke, creosote or ash. Non-clean air fires can still be used in properties located on land greater than 2ha.
  • Warranty All Kent fireboxes are guaranteed for 15 years. The seal, door seal, fire bricks, flue, secondary air system and removable baffle have a one year warranty (parts only).

Features

  • Clean air approved mid-size radiant and convection wood fire
  • Traditional matt black design, 6mm steel
  • Vermiculite brick lined firebox
  • Multi-burn firebox helps wood burnerglass remain clear
  • Steel plate top for cooking use
  • 15 year firebox warranty

Specifications

  • Estimated maximum heat output: 18kW
  • Heats area up to 210m² (typically up to four standard rooms)
  • Average emission rate: 0.98g/kg
  • Overall average efficiency: 66%
  • NZ ECAN Authorisation No. 144661

Accessories

  • Standard Flue Kit Inc. Reflector for Freestanding Fires
  • Energy Saver Flue Kit Inc. Reflector for Freestanding Fires
  • Wall Floor Protector – Small
  • Wall Floor Protector – Large
  • Corner Floor Protector – Large
Top